
Water Heaters
Water Heater Leaking? What to Do Now and What It Means
What to do in the first minutes, how to tell where the water is coming from, and which leaks mean a new heater.
Water Heaters

Short answer: How long does a water heater last? The U.S. Department of Energy says most storage tank water heaters last 10 to 15 years, and tankless water heaters can last more than 20 years. Hard water, high temperature settings and skipped maintenance shorten that. A tank that leaks from its body, makes rusty hot water or is past 10 years with repeated repairs is usually ready for replacement.
Water heaters tend to fail at the worst time, on a cold morning or right before guests arrive. Knowing your heater's age and the warning signs lets you replace it on your schedule instead of in an emergency. When it is time, PipeMend sends licensed plumbers for water heater installation and replacement, sized and permitted for your home.
| Type | Typical life | What wears it out |
|---|---|---|
| Gas tank | 10 to 15 years (DOE) | Tank corrosion, sediment, burner and flue wear |
| Electric tank | 10 to 15 years (DOE) | Tank corrosion, scale on elements |
| Heat pump (hybrid) tank | Tank life plus compressor and fan upkeep | Tank corrosion, dirty air filter, condensate drain clogs |
| Tankless | More than 20 years (DOE) | Scale in the heat exchanger, ignition and sensor parts |
These are typical ranges, not guarantees. Two identical heaters can last very different lengths of time depending on water quality and care.
Look at the label on the side of the tank. The manufacture date is usually built into the serial number, often as a letter for the month and two digits for the year, or as the first four digits (year and week). Formats differ by brand, so check the manufacturer's website or call their support line with the serial number. If the heater has an install sticker or a permit card nearby, that tells you when it went in.
Hard water. Calcium and magnesium settle as scale and sediment. The USGS classifies water above 120 mg/L as hard and above 180 mg/L as very hard, and much of the Southwest and Midwest falls in those ranges.
High temperature settings. Hotter water speeds corrosion and scale. The Department of Energy says 120°F is safe for most people and saves energy, and the CPSC urges the same setting to prevent scalds.
No maintenance. A spent anode rod lets the tank rust, and sediment overheats the tank bottom.
High water pressure and thermal expansion stress the tank and relief valve. See our guide to water pressure for normal ranges.
Location. Garages and attics with big temperature swings, and salty coastal air, are hard on heaters.
Repair usually makes sense when the heater is well inside its expected life and a single part has failed, such as a thermocouple, element, thermostat or valve. Replacement usually makes sense when:
A replacement is a chance to upgrade. ENERGY STAR says a labeled heat pump water heater can save a household of four about $550 a year compared with a standard electric heater, and the DOE says heat pump models can be two to three times more efficient. Tankless units suit homes that want endless hot water within a flow limit; compare them in our tankless vs. tank guide. Replacement usually needs a permit, and codes may require an expansion tank, drain pan or seismic straps.
A tank's warranty, often 6, 9 or 12 years, is a rough guide to how long the maker expects the tank to hold. Longer-warranty models usually have thicker insulation, a larger or second anode rod, and better parts. A warranty doesn't guarantee that life, and it usually covers only the tank and parts, not labor or water damage. Keep your receipt and register the heater with the manufacturer so a claim is easier if the tank fails early.
If your heater is near the end of its expected life, a little planning saves money and stress. Measure the space and note the fuel type, the tank size and the venting. Decide whether you want the same type or an upgrade. Ask a plumber what code items your area will require, such as an expansion tank or a drain pan. Replacing it on a weekday, before it leaks, avoids emergency rates and water damage.
Local note: Very hard water in Arizona, Utah and Iowa wears tanks out faster, so flushing and anode checks matter more there. In Hawaii, many homes use solar water heaters, which have their own maintenance schedule.
Water heater near the end of its life? Call 1-800-555-0199 to get a PipeMend plumber started on the replacement.
Both tank types fall in the same general range. Electric tanks have no burner or flue to corrode, while gas tanks run hotter at the bottom. Water quality and maintenance usually matter more than fuel.
Many homeowners plan for it. A heater past the Department of Energy's 10 to 15 year range can fail without warning, so replacing it on your schedule avoids an emergency and a flooded floor.
It can reduce scale on the tank bottom and on heating elements. Softened water can wear the anode rod faster, so have the rod checked more often.
It is a metal rod inside the tank that corrodes so the steel tank doesn't. When it is used up, the tank starts to rust. Replacing a worn anode rod can add years to a tank.

Water Heaters
What to do in the first minutes, how to tell where the water is coming from, and which leaks mean a new heater.

Water Heaters
How tank and tankless heaters work, how they compare on efficiency, life, flow and installation, and which fits your home.
Leak, clog or no hot water?
Call PipeMend 24/7 to get a licensed plumber started on the fix.
Call 1-800-555-0199