Garbage Disposal Repair and Installation

A disposal that hums but won't spin, leaks into the cabinet or backs up the sink. PipeMend plumbers clear jams, fix leaks and install new disposals sized for your kitchen.

  • Jams, hums and leaks
  • Sink drain clogs
  • New disposal installation
Water running from a faucet into a kitchen sink drain

Quick answer: Garbage disposal repair clears jams, resets tripped motors, fixes leaks at the sink flange and drain connections, and clears the sink drain behind the unit. When a disposal leaks from its body, rusts through or burns out, a plumber replaces it with a new unit sized for your use. Most disposal problems start with grease or hard, stringy food going down the drain.

What garbage disposal service includes

  • Jam clearing and flywheel freeing.
  • Reset and power checks: the reset button, switch, outlet and breaker.
  • Leak repair at the sink flange, dishwasher inlet and drain elbow.
  • Sink drain clearing through the trap and branch line.
  • Replacement with a new unit and a new mounting assembly.
  • Dishwasher connection and air gap or high loop where required.
  • Haul-away of the old unit.

Disposal problems and what they mean

SymptomLikely causeUsual fix
Hums, won't spinJammed flywheelFree the jam; replace if the motor is weak
Nothing happensTripped reset, breaker or bad switchReset; repair the switch or wiring
Leak at the topFailed sink flange sealReseal the flange
Leak at the sideLoose dishwasher or drain connectionTighten or replace the gasket
Leak from the bottomInternal seal failureReplace the disposal
Sink drains slowlyClog in the trap or branch lineClear the drain
Bad smellFood trapped in the chamber or baffleClean the unit and drain

The garbage disposal repair process

  1. Cut power. The disposal is unplugged or the breaker is switched off before anyone reaches in.
  2. Diagnose. The plumber checks power, the reset, the flywheel, the seals and the drain.
  3. Clear or repair. Jams are freed and leaking connections are resealed.
  4. Clear the drain. If water still backs up, the trap and branch drain are cleared.
  5. Quote replacement if needed. A unit leaking from its body or with a failing motor gets a written replacement price.
  6. Test. The disposal runs with water, and the dishwasher drains through it without leaks.

Grease: the disposal's worst enemy

Grease goes down warm and liquid, then cools and sticks to the inside of pipes, catching food scraps as it builds. The EPA's fact sheet on fats, oils and grease says grease is the most common cause of reported sewer blockages. The EPA also lists grease among the main causes of sewer overflows and backups. A disposal grinds food; it doesn't make grease safe to pour. Collect cooking grease in a can and throw it away. For grease clogs further down the line, see hydro jetting.

Choosing a new garbage disposal

  • Motor size: 1/3 to 1/2 horsepower suits light use; 3/4 to 1 horsepower handles heavier use and tougher scraps.
  • Feed type: continuous feed runs with a wall switch; batch feed runs only with the lid in place.
  • Septic systems: ask about models made for septic use, and use the disposal sparingly.
  • Noise: insulated models are quieter.
  • Space: the plumber checks room under the sink and drain height.

What affects the cost of disposal repair

  • Repair or replacement.
  • Motor size and brand of a new unit.
  • Electrical work, such as a new switch or outlet.
  • Drain clearing behind the unit.
  • Dishwasher connection changes.

DIY or call a professional?

With the power off, you can press the reset button and use the hex wrench that came with the unit to free a jam. Never put your hand in the disposal. Call a plumber for leaks, electrical problems, repeat clogs or replacement. The EPA's WaterSense program notes that small leaks add up, and a slow cabinet leak also damages the cabinet floor.

Keep your disposal running

  • Run cold water before, during and after grinding.
  • Feed scraps a little at a time.
  • Keep grease, coffee grounds, eggshells and fibrous peels out.
  • Grind a few ice cubes now and then to clean the chamber.

Garbage disposal questions

Why does my garbage disposal hum but not spin?

The flywheel is usually jammed by a hard object such as a bone, pit or utensil. With the power off, the jam can often be freed from below with a hex wrench in the center socket. If it still hums after clearing, the motor or capacitor may be failing.

Why won't my disposal turn on at all?

First press the red reset button on the bottom of the unit, and check the breaker or GFCI outlet. If it still won't run, the switch, wiring or motor may have failed.

Why is my garbage disposal leaking?

Leaks from the top usually mean the sink flange seal has failed. Leaks from the side come from the dishwasher hose or drain connection. Leaks from the bottom of the unit usually mean internal seals have failed, and the disposal should be replaced.

What should never go in a garbage disposal?

Grease, oil and fat, coffee grounds, eggshells, fibrous peels such as celery and corn husks, pasta and rice in large amounts, bones, and anything that isn't food. Grease is the biggest problem for drains and sewers.

How long does a garbage disposal last?

Many last around 10 years, depending on use and the model. Rust, frequent jams, leaks from the bottom and weak grinding are signs it's time to replace it.

Related plumbing services

Drain cleaning

Slow and clogged sink, tub, shower and floor drains cleared with augers and cameras.

Faucet repair

Dripping faucets, leaky shower valves and worn cartridges repaired or replaced.

Hydro jetting

High-pressure water scours grease, scale and roots out of main drain and sewer lines.

Sources

Last reviewed November 19, 2026 by PipeMend Editorial. General information, not legal, insurance or professional advice. Read our editorial policy.

Leak, clog or no hot water?

Call PipeMend 24/7 to get a licensed plumber started on the fix.

Call 1-800-555-0199
Call PipeMend 1-800-555-0199