Slab Leak Detection and Repair

A warm spot on the floor, the sound of water under the tile, or a water bill that keeps climbing. PipeMend plumbers find leaks under concrete slabs and explain each repair option before any breaking.

  • Pinpoint before breaking
  • Spot repair or reroute
  • Common in slab-on-grade homes

Quick answer: A slab leak is a leak in a water pipe under a concrete floor. Repair starts with pinpoint detection, using pressure tests, acoustic gear and thermal cameras. The fix is then one of three: open the slab and spot-repair the pipe, reroute the line above ground, or repipe the house when the old pipe keeps failing.

Where slab leaks happen

Cross-section of a slab-on-grade home showing a water line under the concrete slab with a leak, and a rerouted line through the wall above Kitchen Bathroom Reroute: new PEX line through walls or attic Concrete slab Soil and gravel base Leak: pinhole or worn spot Found with acoustic and thermal tools Copper water line under the slab A water line under a concrete slab with a leak; options are spot repair, reroute or repipeConcrete slabLeak in the line under the slabRepair options1. Spot repair through the slab2. Reroute the line above the slab3. Repipe when the pipe keeps failingDetection comes first, so anyopening stays small
Water lines in slab-on-grade homes run under the concrete. A reroute abandons the leaking line and runs new pipe above the slab.

What slab leak repair includes

  • Confirmation with meter and pressure tests on hot and cold lines.
  • Pinpoint detection with acoustic listening, thermal imaging and moisture readings.
  • Floor protection and careful removal of flooring at the leak spot.
  • Slab opening with a saw and jackhammer, limited to the marked area.
  • Pipe repair with copper or PEX fittings, then a pressure test.
  • Backfill and concrete patch to restore the slab.
  • Reroute or repipe options priced side by side.

Slab leak repair options compared

OptionWhat it involvesBest when
Spot repairOpen the slab at the leak, fix the pipe, patch the concreteFirst leak, pipe in good shape, easy access
RerouteAbandon the slab line; run new pipe through walls or atticLeak under cabinets, tile or hard-to-reach spots; older pipe
Whole-house repipeReplace the home's supply lines, usually with PEX or copperRepeat leaks, corroded pipe; see repiping
Epoxy liningCoat the inside of the existing pipeSome pinhole leaks; ask about warranty and local acceptance

The slab leak repair process

  1. Isolate. The plumber tests hot and cold lines separately to see which one leaks.
  2. Pinpoint. Acoustic and thermal tools narrow the leak to a small spot on the floor.
  3. Quote options. You get prices for spot repair and reroute, and repipe if the pipe is worn.
  4. Repair. The chosen repair is made, and the line is pressure tested before closing.
  5. Restore. The slab is patched. Flooring is usually replaced by a flooring contractor.
  6. Check for damage. Moisture readings show whether drying or restoration is needed.

Why slab leaks happen

  • Abrasion: pipes rub against concrete, gravel or each other as they expand and contract, especially hot lines.
  • Corrosion: water chemistry and soil conditions wear copper from the inside or outside.
  • Soil movement: expansive clay soils, common in Texas and parts of the West, shift the slab and stress pipes.
  • Installation defects: kinked pipe or poor joints from the original build.
  • High water pressure that strains pipes and joints.

Signs of a slab leak

  • Warm or hot spots on the floor.
  • Sound of running water with all fixtures off.
  • Water meter moving when no water is in use.
  • Damp carpet, cupping wood floors or loose tiles.
  • New cracks in the floor or walls.
  • Higher water or gas bills from a water heater that runs nonstop.

The EPA's WaterSense program suggests reading your meter, using no water for two hours, then reading it again. If the reading changed, you likely have a leak. Our leak detection service covers the next step.

What affects the cost of slab leak repair

  • How deep the pipe is and how thick the slab is.
  • Flooring over the leak, such as tile, hardwood or carpet.
  • Repair method: spot repair, reroute or repipe.
  • Number of leaks and the pipe's overall condition.
  • Water damage repairs and drying.

DIY or call a professional?

You can do the meter test and shut off the main valve if water appears. Finding and repairing a slab leak needs specialized tools, concrete work and pressure testing, so call a licensed plumber. Breaking a slab in the wrong spot is costly.

Limit the damage

  • Shut off the main water valve if water is surfacing.
  • Pull up wet rugs and move furniture.
  • Dry wet materials within 24 to 48 hours, as the EPA advises, to prevent mold.
  • Photograph the damage and call your insurer.

Slab leak questions

What is a slab leak?

A slab leak is a leak in a water line that runs under or inside a concrete floor slab. It is common in slab-on-grade homes, which are widespread across Texas, Florida, Arizona, California and much of the South.

What are the signs of a slab leak?

Warm spots on the floor (hot water line), the sound of running water with fixtures off, a water meter that keeps moving, damp carpet or warped flooring, cracks in the floor, mold smell, and a water heater that runs all the time.

Should I repair a slab leak or reroute the line?

A single leak in otherwise good pipe is often spot-repaired through the slab. If the pipe has leaked before or is corroded, rerouting the line through the walls or attic is usually the longer-lasting choice.

Is a slab leak an emergency?

An active leak should be handled quickly. Shut off the main water valve if water is coming up through the floor. Long-running slab leaks can soak flooring, feed mold and wash out soil under the slab.

Will insurance cover a slab leak?

Many policies cover water damage from a sudden leak and sometimes the cost of access, but not the pipe itself. Coverage varies widely, so call your insurer and keep the leak detection report.

Related plumbing services

Leak detection

Hidden leaks in walls, ceilings and yards found with acoustic, thermal and pressure tests.

Pipe repair and repiping

Burst, corroded or leaking pipes repaired, or whole-home repiping in PEX or copper.

Water line repair

Main water service line leaks, low pressure and line replacement to the street.

Sources

Last reviewed November 19, 2026 by PipeMend Editorial. General information, not legal, insurance or professional advice. Read our editorial policy.

Leak, clog or no hot water?

Call PipeMend 24/7 to get a licensed plumber started on the fix.

Call 1-800-555-0199
Call PipeMend 1-800-555-0199