Hydro Jetting for Drains and Sewer Lines

When a snake only pokes a hole through the problem, hydro jetting cleans the pipe wall itself. PipeMend plumbers check the line with a camera first, then jet it clean.

  • Main drains and sewer lines
  • Grease, scale and roots
  • Camera before and after
Round sewer manhole cover set in a concrete street

Quick answer: Hydro jetting cleans a drain or sewer line with water at high pressure, scouring away grease, soap scale, sludge and tree roots that a snake leaves behind. A camera inspection comes first to make sure the pipe is sound. Jetting is the usual fix for main sewer line clogs that keep coming back.

What hydro jetting includes

  • Camera inspection before jetting to check pipe material, condition and the clog's location.
  • Access through an indoor or outdoor cleanout, or a roof vent when needed.
  • Nozzle choice: penetrating nozzles for blockages, rotating nozzles for grease, root-cutting nozzles for roots.
  • Jetting the full run of the main drain or sewer lateral, upstream and back.
  • Debris flushing to the city main or septic tank.
  • Camera check after to confirm a clean pipe and spot any damage.

When hydro jetting is the right call

SituationWhy jetting helps
Kitchen line that clogs every few monthsRemoves the grease coating that keeps catching food
Root intrusion at jointsCuts roots back to the pipe wall and flushes them out
Scale in old cast iron drainsKnocks down rough buildup that traps paper and waste
Restaurants and apartment buildingsKeeps high-use lines flowing; often done on a schedule
Before a camera inspection or pipe liningGives a clean pipe so damage can be seen and lined

Jetting is not the right call when the camera shows a collapsed, broken or badly offset pipe. Pressure can make that damage worse. Those lines need sewer line repair.

The hydro jetting process

  1. Locate the cleanout. The plumber finds the cleanout or best access point. If there is none, the toilet may be pulled, or a cleanout added.
  2. Run the camera. A sewer camera shows pipe material, joints, roots, sags and the blockage.
  3. Set up the jetter. Hose size, pressure and nozzle are matched to the pipe diameter and what is inside it.
  4. Jet the line. The nozzle pulls itself forward on rear-facing jets, scouring the walls, then is drawn back slowly to flush debris down the line.
  5. Re-inspect. A second camera pass confirms the pipe is clean and records its condition for you.
  6. Test flow. Fixtures are run together to confirm the drain keeps up.

Hydro jetting vs. snaking

Snaking (auger)Hydro jetting
How it worksSteel cable bores through the clogHigh-pressure water scours the whole pipe
Best forSingle clogs: hair, wipes, a toyGrease, scale, sludge, roots in main lines
ResultOpens a path through the clogCleans the pipe wall back to near full size
Camera needed first?Not usuallyYes

Grease and roots: the two big causes

The EPA's Report to Congress on sewer overflows found grease to be the most common cause of reported sewer blockages, at 47 percent. Grease builds up in layers, so snaking it leaves most of the coating behind. Roots are the other big cause. The EPA notes that roots enter sewer lines through defects and openings. Jetting cuts them out, but the opening stays, so lines with heavy roots often need a spot repair or a pipe liner after jetting.

Homes, rentals and businesses

Most homes only need jetting when a main line problem shows up. Restaurants are different. Local sewer rules often require grease traps or interceptors, and kitchen lines may need jetting on a schedule to stay clear. For multi-unit buildings, one blocked main can back up into several units, so scheduled jetting is cheaper than emergency calls. See drain cleaning for single-fixture clogs.

What affects the cost of hydro jetting

  • Length and diameter of the line.
  • How easy the cleanout is to reach, or whether one must be added.
  • How heavy the grease, scale or root buildup is.
  • Camera inspection and a recorded video report.
  • After-hours timing for an active backup.

DIY or call a professional?

Hydro jetting is not a do-it-yourself job. Pressure washers with drain attachments do not have the flow to clean a sewer line, and high-pressure water can injure skin. Call a plumber for any main line clog.

Keeping lines clear after jetting

  • Keep grease, oil and food scraps out of the kitchen sink.
  • Flush only toilet paper.
  • Ask about root treatments or a liner if roots were the cause.
  • Plan a camera check every year or two on older cast iron or clay lines.

Hydro jetting questions

Is hydro jetting safe for old pipes?

It is safe for most sound pipes, including cast iron, PVC and clay in good shape. It is not safe on pipe that is cracked, collapsed or badly corroded, which is why a camera inspection comes first.

How long does hydro jetting last?

Much longer than snaking, because it removes the buildup instead of just opening a hole. How long depends on what caused the buildup. Roots grow back, so lines with root intrusion may need repeat jetting or a repair.

Will hydro jetting remove tree roots?

Yes. Root-cutting nozzles cut and flush out roots that have grown into joints. Roots enter through cracks and loose joints, though, so they come back unless the pipe is repaired or lined.

Is hydro jetting better than snaking?

For grease, scale and roots in a main line, yes. For a single sink or toilet clog, a snake is usually enough and costs less. The plumber recommends the tool based on what the camera shows.

Do I need to be home during hydro jetting?

Someone should be there to give access to the cleanout and to the inside drains. The plumber may run water inside the house while jetting to check flow.

Related plumbing services

Drain cleaning

Slow and clogged sink, tub, shower and floor drains cleared with augers and cameras.

Sewer line repair

Camera inspection, root removal, spot repairs and trenchless sewer line replacement.

Commercial plumbing

Plumbing for restaurants, offices, stores and rental buildings, including grease traps.

Sources

Last reviewed November 19, 2026 by PipeMend Editorial. General information, not legal, insurance or professional advice. Read our editorial policy.

Leak, clog or no hot water?

Call PipeMend 24/7 to get a licensed plumber started on the fix.

Call 1-800-555-0199
Call PipeMend 1-800-555-0199