Plumbers and Plumbing Services in Washington, DC

Washington, DC has some of the oldest housing in the country, from Capitol Hill rowhouses to Petworth porch-fronts. PipeMend sends licensed plumbers to every ward, day and night.

  • Every DC ward
  • Homes, rentals and businesses
  • 24/7 plumbing calls

Quick answer: In the District of Columbia, PipeMend sends licensed local plumbers for burst pipes, drain clogs, water heaters, sewer problems and gas lines. The main local issues are lead and galvanized pipes in old rowhouses, basement sewer backups during heavy rain and tight, hard-to-reach plumbing. 69% of homes here were built before 1980, so aging pipes and drains are a big part of the work.

Washington, DC plumbing at a glance

Population681,294
Housing units361,014
Median year homes were built1958
Homes built before 198069%
Homes built before 194031.5%
Homes heated with natural gas45%
Homes heated with electricity49.9%
FEMA water-related disasters since 200010 of 12 major disasters
Plumbing license issued byDC Board of Industrial Trades (Department of Licensing and Consumer Protection)

Washington, DC figures: Census ACS 2020–2024 (housing) and 2024 (heating fuel), and OpenFEMA disaster declarations from 2000 to November 2026.

Local plumbing conditions in Washington, DC

Much of the District's housing was built before 1940. Rowhouses often still have galvanized supply pipes, cast-iron stacks and old clay sewer laterals running under the front yard to the street. DC Water has an active program to replace lead service lines, and homeowners can ask what their line is made of.

Parts of the District are served by combined sewers that carry both storm water and sewage. During cloudbursts, basements in low areas can take on sewage through floor drains. Backwater valves, sump pumps and sewer line repairs are common basement jobs.

Pipes, drains and housing age in Washington, DC

When homes in Washington, DC were built (share of housing units, Census ACS 2020–2024)
  • Before 194031.5%
  • 1940 to 197937.5%
  • 1980 or later31%

31.5% of homes in the District of Columbia were built before 1940. Many still have galvanized steel supply pipes, cast-iron drains or clay sewer laterals, which rust, crack and let roots in. Homes built before 1986 are more likely to have lead pipes, fixtures or solder, according to the EPA. If yours is that old, test the water and ask your utility what your service line is made of. See pipe repair and repiping, sewer line repair and water line repair.

Common plumbing problems in Washington, DC

ProblemWhere it shows upService that fixes it
Lead and galvanized service linesRowhouses across the older wardsWater line repair
Basement sewer backupsLow-lying neighborhoods in heavy rainSewer line repair
Old cast-iron stacksRowhouses and older apartment buildingsPipe repair and repiping
Water heater swaps in tight spacesBasements and utility closetsWater heater installation

Water heaters and gas lines in Washington, DC

Natural gas heats 45% of homes in the District of Columbia, and gas homes usually have gas water heaters too. That means burners, venting and gas lines to keep safe. Most storage water heaters last 10 to 15 years, according to the Department of Energy. See water heater repair and tankless water heaters.

Storms, flooding and sewer backups in Washington, DC

Since 2000, FEMA has declared 10 water-related major disasters in the District of Columbia, from floods, hurricanes and severe storms. The most recent was in 2016 (snowstorm). Heavy rain overloads sewers and fills basements, so sump pumps, backwater valves and sewer line repairs matter here.

How to protect your plumbing in Washington, DC

Plumbing licenses and permits in Washington, DC

The DC Board of Industrial Trades (Department of Licensing and Consumer Protection) licenses plumbers in the District of Columbia. Ask for the license number and look it up.

In the District of Columbia, local building departments issue plumbing permits. Expect one for gas lines, water heaters, sewer or water service work and repiping.

Every PipeMend job in Washington, DC goes to a plumber who holds the license that work requires there, and you get a written estimate before work starts.

Neighborhoods served in Washington, DC

Calls come from all eight wards, including Capitol Hill, Georgetown, Columbia Heights, Petworth, Brookland, Navy Yard and Anacostia. Calls from neighboring Maryland and Virginia are covered too.

Plumbing questions in Washington, DC

Do you have plumbers in all of the District of Columbia?

Yes. PipeMend takes plumbing calls from every ward of the District, around the clock, and from nearby Maryland and Virginia suburbs.

Do plumbers need a license in the District of Columbia?

Yes. The DC Board of Industrial Trades (Department of Licensing and Consumer Protection) licenses plumbers in the District of Columbia. Gas line work may need its own license or endorsement.

Do I need a permit for plumbing work in the District of Columbia?

Often, yes. Most local building departments in the District of Columbia require permits for water heaters, gas lines, sewer and water service lines and repiping. Small repairs such as a faucet or toilet usually do not need one.

Does Washington, DC still have lead water lines?

Some homes still do, mostly older houses. DC Water runs a program to find and replace lead service lines, and you can check your address with the utility. A plumber can also look at the pipe where it enters your basement.

Plumbing services in Washington, DC

Plumbers in nearby states

Helpful guides

Sources

Last reviewed November 19, 2026 by PipeMend Editorial. General information, not legal, insurance or professional advice. Read our editorial policy.

Leak, clog or no hot water?

Call PipeMend 24/7 to get a licensed plumber started on the fix.

Call 1-800-555-0199
Call PipeMend 1-800-555-0199